Hot Rice Border

The "Queen" cookery books. No. 4. Entree · S. Beaty-Pownall · 1904
Source
The "Queen" cookery books. No. 4. Entree
Status
success · extracted 4 days ago
Not a recipe
No
Ingredients (13)
For moulding rice border (hot method)
For moulding rice border (cold method)
For making rice border or centre (alternative method)
Instructions (25)
Hot Rice Border (Moulded)
  1. Boil the rice in the usual way, till tender, but do not dry it.
  2. Press it tightly into a well buttered mould.
  3. Cover it with a buttered paper.
  4. Place another paper folded in the bain-marie pan.
  5. Set the mould on this.
  6. Poach it in the bain-marie for half an hour or so.
  7. Turn out.
Hot Rice Border (Moulded, for Cold Use)
  1. Cook some milk or stock in a well buttered pan (this prevents any risk of sticking).
  2. When this is hot, but not boiling, put in the rice (allowing 2oz. of Carolina rice to the half pint of liquid).
  3. Bring to the boil, then keep it at simmering point from thirty to forty-five minutes, till it has absorbed most, if not all, of the liquid, and is soft and plump, but not cooked to a pap.
  4. It should be covered with a buttered paper, and the lid of the pan kept on whilst cooking, being careful that it does not catch.
  5. When done, add to it a teaspoonful of cold water, or milk.
  6. Pour at once into a border mould previously well rinsed in cold water.
  7. Leave it till cold before turning it out.
  8. This is all the better for being iced.
  9. The first method given can also be used cold, but must be turned out whilst hot.
Rice Border or Centre (Alternative Method)
  1. Put the rice on with cold water enough to cover it well, and blanch it, then rinse in cold water.
  2. Return it to the pan with more cold water.
  3. Cover with a buttered paper.
  4. Bring to the boil, and then simmer it very slowly in the oven, or at the side of the stove, for two and a half to three hours, adding a little more water now and again, as required.
  5. When cooked and quite dry, pound it till quite smooth.
  6. Work it to a ball with your hands dipped in cold water (to avoid its sticking).
  7. Dry well on a clean cloth.
  8. Press it tightly into a well buttered plain mould, and weight it down firmly till perfectly cold.
  9. Turn out and use, or cut to any desired shape.
Original Text · last edited 4 days ago
A hot rice border is made in two ways: either the rice is plainly cooked, and piled loosely round the dish, as for curry, or it is moulded. For this latter boil the rice in the usual way, till tender, but do not dry it; then press it tightly into a well buttered mould, cover it with a buttered paper, place another paper folded in the bain-marie pan, set the mould on this, and poach it in the bain-marie for half an hour or so, and then turn out. If to be used cold, cook some milk or stock in a well buttered pan (this prevents any risk of sticking), and when this is hot, but not boiling, put in the rice (allowing 2oz. of Carolina rice to the half pint of liquid), bring to the boil, then keep it at simmering point from thirty to forty-five minutes, till it has absorbed most, if not all, of the liquid, and is soft and plump, but not cooked to a pap. It should be covered with a buttered paper, and the lid of the pan kept on whilst cooking, being careful that it does not catch. When done, add to it a teaspoonful of cold water, or milk, and pour at once into a border mould previously well rinsed in cold water, and leave it till cold before turning it out. This is all the better for being iced. Another way to make rice border, or a centre for any dish, is to put the rice on with cold water enough to cover it well, and blanch it, then rinse in cold water, and return it to the pan with more cold water, cover with a buttered paper, bring to the boil, and then simmer it very slowly in the oven, or at the side of the stove, for two and a half to three hours, adding a little more water now and again, as required. When cooked and quite dry, pound it till quite smooth, and work it to a ball with your hands dipped in cold water (to avoid its sticking), dry well on a clean cloth, and press it tightly into a well buttered plain mould, and weight it down firmly till perfectly cold, when it can be turned out and used, or cut to any desired shape. The first method given can also be used cold, but must be turned out whilst hot.
Notes